View STGB14NC60KD_4698998.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

STGB14NC60KD STGF14NC60KD - STGP14NC60KD
14 A - 600 V - short circuit rugged IGBT
Features

Low on-voltage drop (VCE(sat)) Low Cres / Cies ratio (no cross conduction susceptibility) Switching losses include diode recovery energy Very soft ultra fast recovery antiparallel diode Short circuit withstand time 10s.
2
3 1
1 2
3
DPAK
TO-220
3
Applications

1
2
High frequency inverters SMPS and PFC in both hard switch and resonant topologies Motor drivers Figure 1.
TO-220FP
Internal schematic diagram
Description
This IGBT utilizes the advanced PowerMESHTM process resulting in an excellent trade-off between switching performance and low on-state behavior.
Table 1.
Device summary
Marking GB14NC60KD GF14NC60KD GP14NC60KD Package DPAK TO-220FP TO-220 Packaging Tape and reel Tube Tube
Order codes STGB14NC60KDT4 STGF14NC60KD STGP14NC60KD
April 2008
Rev 6
1/16
www.st.com 16
Contents
STGB14NC60KD - STGF14NC60KD - STGP14NC60KD
Contents
1 2 Electrical ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Electrical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
2.1 Electrical characteristics (curves) ........................... 7
3 4 5 6
Test circuit
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Package mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Packaging mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 Revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
2/16
STGB14NC60KD - STGF14NC60KD - STGP14NC60KD
Electrical ratings
1
Electrical ratings
Table 2.
Symbol VCES IC
(1)
Absolute maximum ratings
Value Parameter TO-220/DPAK TO-220FP Collector-emitter voltage (VGE = 0) Collector current (continuous) at TC = 25 C Collector current (continuous) at TC = 100 C Turn-off latching current Pulsed collector current Gate-emitter voltage Diode RMS forward current at TC = 25 C Surge non repetitive forward current tp = 10 ms sinusoidal Insulation withstand voltage (RMS) from all three leads to external hea sink ( t=1 s; TC = 25 C) Total dissipation at TC = 25 C Short circuit withstand time, VCE = 0.5VBR(CES) , TC = 125 C, RG = 10 , VGE = 12 V Operating junction temperature -80 10 - 55 to 150 25 14 50 50 20 20 55 600 11 7 V A A A A V A A Unit
IC(1) ICL ICP
(2) (3)
VGE IF IFSM
VISO PTOT tscw Tj
1.
2500 28
V W s C
Calculated according to the iterative formula:
T -T JMAX C I ( T ) = ----------------------------------------------------------------------------------------------------CC R xV (T , I ) THJ - C CESAT ( MAX ) C C
2. Vclamp = 80% of VCES, Tj =150 C, RG=10 , VGE=15 V 3. Pulse width limited by max. junction temperature allowed
Table 3.
Symbol
Thermal resistance
Value Parameter TO-220/DPAK TO-220FP 1.56 2.2 62.5 4.5 5.6 Unit C/W C/W C/W
Rthj-case Thermal resistance junction-case max Rthj-case Thermal resistance junction-case max diode Rthj-amb Thermal resistance junction-ambient max
3/16
Electrical characteristics
STGB14NC60KD - STGF14NC60KD - STGP14NC60KD
2
Electrical characteristics
(TCASE=25 C unless otherwise specified) Table 4.
Symbol VBR(CES) IGES ICES VGE(th) VCE(SAT) gfs (1)
Static
Parameter Test conditions Min. 600 100 150 1 4.5 2.1 1.8 3.2 6.5 2.5 Typ. Max. Unit V nA A mA V V V S
Collector-emitter breakdown IC= 1 mA voltage (VGE= 0) Gate-emitter leakage current (VCE = 0) Collector cut-off current (VGE = 0) Gate threshold voltage Collector-emitter saturation voltage Forward transconductance VGE= 20 V VCE= 600 V VCE= 600 V, TC= 125 C VCE= VGE, IC= 250 A VGE= 15 V, IC= 7 A VGE= 15 V, IC= 7 A, TC= 125 C VCE = 15 V , IC = 7 A
1. Pulsed: Pulse duration = 300 s, duty cycle 1.5%
Table 5.
Symbol Cies Coes Cres Qg Qge Qgc
Dynamic
Parameter Input capacitance Output capacitance Reverse transfer capacitance Total gate charge Gate-emitter charge Gate-collector charge Test conditions Min. Typ. 760 86 15.5 34.4 8.1 16.4 Max. Unit pF pF pF nC nC nC
VCE = 25 V, f = 1 MHz, VGE= 0
VCE = 390 V, IC = 7 A, VGE = 15 V (see Figure 19)
4/16
STGB14NC60KD - STGF14NC60KD - STGP14NC60KD
Electrical characteristics
Table 6.
Symbol td(on) tr (di/dt)on td(on) tr (di/dt)on tr(Voff) td(off) tf tr(Voff) td(off) tf
Switching on/off (inductive load)
Parameter Turn-on delay time Current rise time Turn-on current slope Turn-on delay time Current rise time Turn-on current slope Off voltage rise time Turn-off delay time Current fall time Off voltage rise time Turn-off delay time Current fall time Test conditions VCC = 390 V, IC = 7 A , RG= 10 VGE= 15 V, (see Figure 18) VCC = 390 V, IC = 7 A , RG= 10 VGE= 15 V, TC= 125 C (see Figure 18) Vcc = 390 V, IC = 7 A, , RGE = 10 VGE = 15 V (see Figure 18) Vcc = 390 V, IC = 7 A, , RGE = 10 VGE = 15 V TC= 125 C (see Figure 18) Min. Typ. 22.5 8.5 700 22 9.5 680 60 116 75 24 196 144 Max. Unit ns ns A/s ns ns A/s ns ns ns ns ns ns
Table 7.
Symbol Eon (1) Eoff (2) Ets Eon (1) Eoff (2) Ets
Switching energy (inductive load)
Parameter Turn-on switching losses Turn-off switching losses Total switching losses Turn-on switching losses Turn-off switching losses Total switching losses Test conditions VCC = 390 V, IC = 7 A , RG= 10 VGE= 15 V, (see Figure 18) VCC = 390 V, IC = 7 A , RG= 10 VGE= 15 V, TC= 125 C (see Figure 18) Min Typ. 82 155 237 131 370 501 Max Unit J J J J J J
1. Eon is the turn-on losses when a typical diode is used in the test circuit. If the IGBT is offered in a package with a co-pack diode, the co-pack diode is used as external diode. IGBTs and DIODE are at the same temperature (25C and 125C) 2. Turn-off losses include also the tail of the collector current.
Table 8.
Symbol VF trr Qrr Irrm trr Qrr Irrm
Collector-emitter diode
Parameter Forward on-voltage Reverse recovery time Reverse recovery charge Reverse recovery current Reverse recovery time Reverse recovery charge Reverse recovery current Test conditions IF = 7 A IF = 7 A, TC= 125 C IF = 7 A, VR = 40 V, di/dt = 100 A/s (see Figure 21) IF = 7 A, VR = 40 V, TC= 125 C, di/dt = 100 A/s (see Figure 21) Min Typ. 1.8 1.3 37 40 2.1 61 98 3.2 Max 2.1 Unit V V ns nC A ns nC A
5/16
Electrical characteristics
STGB14NC60KD - STGF14NC60KD - STGP14NC60KD
2.1
Figure 2.
Electrical characteristics (curves)
Output characteristics Figure 3. Transfer characteristics
Figure 4.
Transconductance
Figure 5.
Collector-emitter on voltage vs temperature
Figure 6.
Collector-emitter on voltage vs collector current
Figure 7.
Normalized gate threshold vs temperature
6/16
STGB14NC60KD - STGF14NC60KD - STGP14NC60KD Figure 8. Normalized breakdown voltage vs temperature Figure 9.
Electrical characteristics Gate charge vs gate-emitter voltage
Figure 10. Capacitance variations
Figure 11. Switching losses vs temperature
Figure 12. Switching losses vs gate resistance Figure 13. Switching losses vs collector current
7/16
Electrical characteristics Figure 14. Thermal impedance
STGB14NC60KD - STGF14NC60KD - STGP14NC60KD Figure 15. Turn-off SOA
Figure 16. Thermal impedance for TO-220FP
Figure 17. Forward voltage drop versus forward current
FM(A)
45 40 35 30 25 20 15 10 5 0 0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0
Tj=150C (Maximum values)
Tj Tj=150C (Typical values) Tj=25C (Maximum values)
VFM(V
8/16
STGB14NC60KD - STGF14NC60KD - STGP14NC60KD
Test circuit
3
Test circuit
Figure 19. Gate charge test circuit
Figure 18. Test circuit for inductive load switching
Figure 20. Switching waveforms
Figure 21. Diode recovery times waveform
9/16
Package mechanical data
STGB14NC60KD - STGF14NC60KD - STGP14NC60KD
4
Package mechanical data
In order to meet environmental requirements, ST offers these devices in ECOPACK(R) packages. These packages have a Lead-free second level interconnect. The category of second level interconnect is marked on the package and on the inner box label, in compliance with JEDEC Standard JESD97. The maximum ratings related to soldering conditions are also marked on the inner box label. ECOPACK is an ST trademark. ECOPACK specifications are available at: www.st.com
10/16
STGB14NC60KD - STGF14NC60KD - STGP14NC60KD
Package mechanical data
TO-220 mechanical data
mm Dim Min A b b1 c D D1 E e e1 F H1 J1 L L1 L20 L30 P Q 4.40 0.61 1.14 0.48 15.25 1.27 10 2.40 4.95 1.23 6.20 2.40 13 3.50 16.40 28.90 3.75 2.65 3.85 2.95 0.147 0.104 10.40 2.70 5.15 1.32 6.60 2.72 14 3.93 0.393 0.094 0.194 0.048 0.244 0.094 0.511 0.137 Typ Max 4.60 0.88 1.70 0.70 15.75 Min 0.173 0.024 0.044 0.019 0.6
inch Typ Max 0.181 0.034 0.066 0.027 0.62 0.050 0.409 0.106 0.202 0.051 0.256 0.107 0.551 0.154 0.645 1.137 0.151 0.116
11/16
Package mechanical data
STGB14NC60KD - STGF14NC60KD - STGP14NC60KD
TO-220FP mechanical data
Dim. A B D E F F1 F2 G G1 H L2 L3 L4 L5 L6 L7 Dia 28.6 9.80 2.9 15.90 9 3 mm. Min. 4.40 2.5 2.5 0.45 0.75 1.15 1.15 4.95 2.40 10 16 30.6 10.60 3.6 16.40 9.30 3.2 1.126 0.385 0.114 0.626 0.354 0.118 Typ Max. 4.60 2.7 2.75 0.70 1.00 1.50 1.50 5.20 2.70 10.40 Min. 0.173 0.098 0.098 0.017 0.030 0.045 0.045 0.195 0.094 0.393 0.630 1.204 0.417 0.141 0.645 0.366 0.126 inch Typ. Max. 0.181 0.106 0.108 0.027 0.039 0.067 0.067 0.204 0.106 0.409
A
B
L3 L6 L7
Dia
F1
D
F
G1 H
F2
E
L2 L5
123
L4
7012510-I
12/16
G
STGB14NC60KD - STGF14NC60KD - STGP14NC60KD
Package mechanical data
DPAK (TO-263) mechanical data
mm Dim Min A A1 b b2 c c2 D D1 E E1 e e1 H J1 L L1 L2 R V2 4.40 0.03 0.70 1.14 0.45 1.23 8.95 7.50 10 8.50 2.54 4.88 15 2.49 2.29 1.27 1.30 0.4 0 8 0 5.28 15.85 2.69 2.79 1.40 1.75 0.192 0.590 0.099 0.090 0.05 0.051 Typ Max 4.60 0.23 0.93 1.70 0.60 1.36 9.35 10.40 Min 0.173 0.001 0.027 0.045 0.017 0.048 0.352 0.295 0.394 0.334
inch Typ Max 0.181 0.009 0.037 0.067 0.024 0.053 0.368 0.409 0.1 0.208 0.624 0.106 0.110 0.055 0.069 0.016 8
0079457_M
13/16
Packaging mechanical data
STGB14NC60KD - STGF14NC60KD - STGP14NC60KD
5
Packaging mechanical data
D2PAK FOOTPRINT
TAPE AND REEL SHIPMENT
REEL MECHANICAL DATA
DIM. A B C D G N T 1.5 12.8 20.2 24.4 100 30.4 26.4 13.2 mm MIN. MAX. 330 0.059 0.504 0.520 0795 0.960 1.039 3.937 1.197 BULK QTY 1000 inch MIN. MAX. 12.992
TAPE MECHANICAL DATA
DIM. A0 B0 D D1 E F K0 P0 P1 P2 R T W mm MIN. 10.5 15.7 1.5 1.59 1.65 11.4 4.8 3.9 11.9 1.9 50 0.25 23.7 24.3 MAX. 10.7 15.9 1.6 1.61 1.85 11.6 5.0 4.1 12.1 2.1 inch MIN. MAX. 0.413 0.421 0.618 0.626 0.059 0.063 0.062 0.063 0.065 0.073 0.449 0.456 0.189 0.197 0.153 0.161 0.468 0.476 0.075 0.082 1.574 0.35 0.0098 0.0137 0.933 0.956
BASE QTY 1000
* on sales type
14/16
STGB14NC60KD - STGF14NC60KD - STGP14NC60KD
Revision history
6
Revision history
Table 9.
Date 14-Jun-2005 05-Jul-2005 22-Jul-2005 27-Jan-2006 28-Apr-2006 02-Apr-2008
Document revision history
Revision 1 2 3 4 5 6 New release Complete version Value changed in table 6 Inserted ecopack indication New template, modified curves 6 and 8 Modified test conditions on Table 4 Changes
15/16
STGB14NC60KD - STGF14NC60KD - STGP14NC60KD
Please Read Carefully:
Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries ("ST") reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any time, without notice. All ST products are sold pursuant to ST's terms and conditions of sale. Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no liability whatsoever relating to the choice, selection or use of the ST products and services described herein. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such third party products or services or any intellectual property contained therein.
UNLESS OTHERWISE SET FORTH IN ST'S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZED ST REPRESENTATIVE, ST PRODUCTS ARE NOT RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY, DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER'S OWN RISK.
Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any liability of ST.
ST and the ST logo are trademarks or registered trademarks of ST in various countries. Information in this document supersedes and replaces all information previously supplied. The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners.
(c) 2008 STMicroelectronics - All rights reserved STMicroelectronics group of companies Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America www.st.com
16/16

▲Up To Search▲

Price & Availability of STGB14NC60KD

	To Download STGB14NC60KD Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .